Aurora+ Seed Germination Kit- Pepper Series
Aurora+ Seed Germination Kit- Pepper Series
Have no fear, the most popular 80-82 F setting is still there! It's the lower, solid light setting. Many of our customers germinate pepper seeds and requested a slightly warmer high setting. You asked, we listened!
For a very limited run:
Flashing light 85-87F(29.5-30.5C)
Solid light 80-82F(26.5-27.5C)
An ideal germination environment cocoons your seeds in evenly distributed heat and hydration, allowing them the ideal conditions to flourish. Certain seeds can be very expensive or require lengthy periods of incubation to germinate, leaving them vulnerable. Aurora+ is an energy-efficient, highly effective, and safe space to start your seeds. Eliminating environmental stress during this critical process can aid in yielding a strong healthy plant.
What's In The Box?
1 Aurora+
1 USB-C cord
1 USB-C wall plug (International customers will have to purchase their own plug)
1 pair of tweezers
1 pipette
4 silicone stick-on feet for thermal efficiency
1 bag of cotton pads
Specs
Aurora+ is approximately 5.375"(13.65cm)L x 3.75"(9.525cm)W x 1"(2.54cm)H
There are 12 pods per unit, each 25mm in diameter and approximately 10mm deep
The product packaging of the Aurora+ is:
5.5"(13.97cm)L x 4"(10.16cm)W x 2.5"(6.35cm)H
1.5 amp draw 5 watts max, usbc powered. There are no batteries or internal power supply in the Aurora+. The plug (for US and Canadian customers) and cord provided are ETL-listed and compliant.
Please consult our instructions and FAQs before purchase or use.
1-year limited manufacturer's warranty:
Never submerge in water. Never use isopropyl alcohol to clean. Never soak a cleaning solution long term. Never use without the protective foam piece in place above the USB port. Never get the USB port or indicator light wet. Do not open the sealed panel on the bottom. Never over fill with solution. Use caution with more than 2-3.0 ml per pod with cotton, 1-2.0 ml without cotton. Warranty void with water damage. Warranty void if bottom panel opened. Unplug when not in use. Clean between use and before storing to avoid damping off and damage to powder coating. Use USB-C cord and plug provided. Unplug when not in use. Do not use metal tools with the Aurora+.